How to build a guitar wall hanger - DIY woodworking India
Hi all! Welcome to DIY woodworking India. Hope you are doing well. Today I will share how I have built my guitar wall hanger. It will be made of iron, so welding on our way!
Materials:
1) U bracket
2) Iron rod of about 1/2 feet long
3) One quarter feet long 1 inch breath iron block - it will be used for wall mount.
We have to weld the U block to the iron rod first. For that, make a small groove in one end of the iron rod and file the U bracket in the middle such that they form a lock. Then weld them together.
Look at the joint carefully in the picture above. Lastly, weld the back with the hole to unit. Once welded, it looks like below.
Grind the edges and the entire unit so that there is no rust left. Now, it is time add some colour to it.
Almost done, but need to add rubber caps to the U unit, so that guitar can sit there smoothly without any scratch.
Thats it! Thanks for visiting woodworking India.
Hi all! Welcome to DIY woodworking India. Hope you are doing well. Today I will share how I have built my guitar wall hanger. It will be made of iron, so welding on our way!
Materials:
1) U bracket
2) Iron rod of about 1/2 feet long
3) One quarter feet long 1 inch breath iron block - it will be used for wall mount.
We have to weld the U block to the iron rod first. For that, make a small groove in one end of the iron rod and file the U bracket in the middle such that they form a lock. Then weld them together.
Look at the joint carefully in the picture above. Lastly, weld the back with the hole to unit. Once welded, it looks like below.
Almost done, but need to add rubber caps to the U unit, so that guitar can sit there smoothly without any scratch.
Thats it! Thanks for visiting woodworking India.
No comments:
Post a Comment