How to build a simple wash basin table - DIY woodworking India
Its a Sunday and I have resumed working on the table. As the frame has already been made yesterday, today I am planning to fix 4mm plywoods covering the frame. I had a 8'x4' of the same which is already laminated in one side. I just have to cut it in measured sizes and fix them to the frame by using nails. I have done it today and here is a photo.
To be continued.
Hi all, welcome. I need to have a wash basin near my dining area. The dimension has to be 2'x1'6'' due to space crunch. I had a plan in mind, though I have ended up using few of my old hardwood structure in the table frame. I built a bed from where I have got this below structure.
 |
| Bed head column from a DIY bed |
Flip these pieces 2 units - I will say it a "I" structure, add the support frames. We have almost got the inner structure.
The structure is quite strong. Lets see a demo of whatever have been done so far.
Further plan is to cover the sides except the front with 4mm plywood and then laminate it. I will put 18 mm ply or granite or marble stone on the top. I will definitely build a storage inside for sure. Let me show the future planning here.
Its a Sunday and I have resumed working on the table. As the frame has already been made yesterday, today I am planning to fix 4mm plywoods covering the frame. I had a 8'x4' of the same which is already laminated in one side. I just have to cut it in measured sizes and fix them to the frame by using nails. I have done it today and here is a photo.
 |
| DIY simple table top wash basin table |
Much thanks to you again for all the learning you distribute,Good post. I was keen on the article, it's very moving I ought to concede. I like visiting you site since I generally go over fascinating articles like this one.Great Job, I extraordinarily acknowledge that.Do Keep sharing! Respects, best silk sheets
ReplyDelete